5kV/8kV EPR/AIA/PVC Shielded Armoured Power Cable Manufacturer - Jiapu Cable

5kV/8kV EPR/AIA/PVC Shielded Armoured Power Cable Manufacturer

Date2019-04-30

5kV/8kV EPR/AIA/PVC Shielded Armoured Power Cable Construction:

Conductor: 6 AWG thru 1000 kcmil bare, compact copper Class B strand

Extended Strand Shield (ESS): Thermoset Semi-Conductng Extruded Stress Control Layer over conductor

Insulation: Ethylene Propylene Rubber (EPR) colored to contrast with black conducting shield layer

Extruded Insulation Shield (EIS): Thermoset Semi-Conducting Polymeric Layer free stripping from insulation

Shield: 5 mil annealed copper tape with a minimum 25% overlap

Ground: Annealed bare copper Class B stranding per ASTM B8

Armor: Aluminum Interlocked Armor (AIA)

Jacket: Flame retardant, moisture and sunlight resistant Polyvinyl Chloride (PVC) - yellow

5kV/8kV EPR/AIA/PVC Shielded Armored Power Cable Options: Other constructions available upon request

20190108143625.jpg

5kV/8kV EPR/AIA/PVC Shielded Armored Power Cable Applications:

Ideally suited for use in a broad range of commercial, industrial and utility applications where reliability is the major concern, maximum performance is demanded, space is limited, ease of installation is critical and fire resistance is necessary

May be installed in wet or dry locations, indoors or outdoors and in exposed or concealed work

May be used in cable trays or on approved supports in protected areas

Permitted for use in Class I, Class II Division 2, and Class III Divisions 1 and 2 per NEC Article 334

pvc_arm_cable.jpg

5kV/8kV EPR/AIA/PVC Shielded Armored Power Cable Features:

Rated at 105°C wet or dry

Excellent heat and moisture resistance

Outstanding corona resistance

Flexibility for easy handling

High dielectric strength

Low moisture absorption

Electrical stability under stress

Low dielectric loss

Chemical and radiation resistant

Excellent crush resistance

Cost-effective alternative to installations in conduit

Meets cold bend test at -25°C